Gear Peaked Cylindrical Rod Candle Mold Diy Pinstripe Cylindrical

$5.12 $5.12

Product category; Candle mold/plastic mold

Product color; transparent

Product material; plastic

Product packaging; 1 plastic mold. excluding candles

Kind Reminder Due to manual measurement, please allow for an error of 0.1cm-0.3cm

Attention Due to the complexity of the production process, molds are manually cut, leaving edges and some uneven marks on the outside. This is not a quality issue and will not affect the normal use of the product.

Candle making operation and precautions

① There are reserved small holes at the bottom of the mold for threading the wick, and it is necessary to seal the bottom of the mold with ultra light clay or other soft materials.

② Pour the wax solution into the mold at 60-90 degrees, let it cool completely for about 4 hours, and then remove it.

③ When demolding, tap the outer edge of the mold on the tabletop to remove the finished product


Product category; Candle mold/plastic mold

Product color; transparent

Product material; plastic

Product packaging; 1 plastic mold. excluding candles

Kind Reminder Due to manual measurement, please allow for an error of 0.1cm-0.3cm

Attention Due to the complexity of the production process, molds are manually cut, leaving edges and some uneven marks on the outside. This is not a quality issue and will not affect the normal use of the product.

Candle making operation and precautions

① There are reserved small holes at the bottom of the mold for threading the wick, and it is necessary to seal the bottom of the mold with ultra light clay or other soft materials.

② Pour the wax solution into the mold at 60-90 degrees, let it cool completely for about 4 hours, and then remove it.

③ When demolding, tap the outer edge of the mold on the tabletop to remove the finished product